Dc 315 Spec Sheet

Dc 315 Spec Sheet – Dc 315 is a water based coating which will freeze and become unusable at temperatures below 32° f. Dc 315 is the only 3rd party inspected fire protective coating for spf marked and listed by warnock hersey intertek w/n 20947 single coat coverage reducing labor and material. Application guide dc315 is the most tested and approved product for use as an alternative thermal barrier or ignition barrier coating for spray polyurethane foam (spf). Dc 315 testing matrix approved foam testing matrix for dc315 building code fire performance requirements for spf:

150/200 Hp, 650/1800 Rpm, 315/475V, General Electric Cd684, Stab Shunt

Dc 315 Spec Sheet

Humidity 65% and high must. Dc 315 is not washable. At 77°f & 50% rh type of cure:

Flat Ice Gray, White, Dark Grey And Charcoal Black V.o.c.:

Flat ice gray, white and charcoal black 10.3 g/l tvoc 18.6. Dc315 is the most tested and approved product for use as an alternative thermal barrier or ignition barrier coating for spray polyurethane foam (spf). Dc315 is a high performance intumescent coating for spray polyurethane foam (spf) and provides a fire protective barrier to delay the involvement of the foam in a fire.

At 77°F & 50% Rh Type Of Cure:

Description dc315 is an intumescent coating for spray polyurethane foam (spf) and provides an alternative 15 or 20 minute thermal barrier. Tested and compliant in the. The international building code (ibc) mandates.

Protect From Freezing During Shipment And Storage.

Dc315 is an intumescent coating for spray polyurethane foam [spf] and provides an alternative 15 or 20 minute thermal barrier. Dc 315 is the only 3rd party inspected fire protective coating for spf marked and listed by warnock hersey intertek w/n 20947 single coat coverage reducing labor and material. Dc 315 is the most tested and approved product in the world for use as an “alternative thermal barrier coating system over spray polyurethane foam (spf).

Dc315 Is A High Performance Intumescent Coating For Spray Polyurethane Foam (Spf) And Provides A Fire Protective Barrier To Delay The Involvement Of The Foam In A Fire.

Tested and com pliant in the usa by icc. Drying time 67% @ 77°f & 50% rh to touch 1. Dc315 intumescent coating for spray polyurethane foam (spf) provides an alternative 15 or 20 minute thermal barrier.

Intumescent Coatings Equipment Options Direct